S-Type Filling Coupler

Code: B23835
Not rated Rating details
€105 €86,78 excl. VAT Measure price:
In stock (10 pcs)
Delivery to:
24.11.2026

S-Type Keg Filling Kit with Keg Coupler and 0–10 Bar Pressure Gauge is a practical solution for filling beer into S-type commercial kegs.

Detailed information

Product detailed description

S-Type Keg Filling Kit with Keg Coupler and 0–10 Bar Pressure Gauge is a practical solution for filling beer into S-type commercial kegs. The kit allows counter-pressure filling, helping to minimize foaming, CO₂ loss and unwanted oxygen exposure. It is suitable for homebrewers and smaller breweries.

The filling system is based on a stainless steel S-type keg coupler, equipped with ball valves, a pressure gauge and Y-shaped adapters. The assembly allows the operator to control beer flow, monitor pressure inside the keg and gradually release gas during filling. The DMfit push-fit connector provides a convenient connection for compatible tubing.

Main advantages:

  • Easy filling of commercial kegs with S-type valves.
  • Counter-pressure filling helps reduce foaming and CO₂ loss.
  • 0–10 bar pressure gauge for monitoring keg pressure.
  • Ball valves for controlling beer and gas flow.
  • Controlled pressure release during the filling process.
  • Suitable for homebrewing and small-scale brewery operations.

How does it work?

The filling system operates on the counter-pressure principle. Beer flows into a pre-pressurized keg, displacing CO₂, which is gradually released through a control valve. By maintaining a small pressure difference between the source vessel and the receiving keg, beer can be transferred smoothly with reduced foaming.

Basic filling procedure:

  • 1. Assemble the filling kit and connect it to a clean and sanitized keg fitted with an S-type valve.
  • 2. Connect the beer supply from the source vessel and arrange the CO₂ supply.
  • 3. Purge the receiving keg with CO₂ before filling to minimize oxygen exposure.
  • 4. Pressurize the keg with CO₂ to a pressure appropriate for the filling conditions.
  • 5. Open the beer inlet and gradually release CO₂ to create a small pressure difference, allowing beer to flow into the keg.
  • 6. Monitor the pressure gauge throughout the process and adjust the gas release as necessary.
  • 7. Once the desired volume has been transferred, close the beer inlet and safely equalize the pressure in the relevant part of the filling system before disconnecting.

Specifications:

  • Keg coupler type: S-type
  • Keg coupler material: stainless steel
  • Pressure gauge range: 0–10 bar
  • Filling method: counter-pressure filling
  • Application: filling beer into commercial kegs
  • Supplied unassembled

Package contents:

  • 1× Stainless steel S-type keg coupler KL SS NEW
  • 2× Stainless steel ball valves, 5/8" F/M
  • 1× Adapter F5/8 × M1/4
  • 1× Pressure gauge with 8 mm stem, 0–10 bar
  • 1× DMfit push-fit connector, M1/4 × 8 mm (5/16"), with O-ring
  • 1× Brass reducing ball valve, 1/4 × 5/8 M/M
  • 1× PTFE thread sealing tape, 12 mm × 10 m × 0.075 mm
  • 1× Y-shaped adapter, 2× M5/8 × F5/8
  • 1× Y-shaped adapter, 3× F1/4

Important: This filling kit is not intended for intensive industrial use. Recommended capacity is approximately 100–150 kegs of 50 liters per week at most. The kit is supplied unassembled and requires assembly before use. Always observe the safe working pressure limits of the kegs and all connected equipment.

Additional parameters

Category: Keg and Bottle Fillers
Weight: 1.22 kg

Plnička keg sudu

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Vložením hodnocení souhlasíte s podmínkami ochrany osobních údajů

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

×

Splátková kalkulačka ESSOX