Kegerator SLIM Beer Tower with 1x Dispensing Tap, Keg Fridge

Product detailed description

The KEGBOX.4 kegerator with a SLIM beer tower and one stainless steel Intertap flow control faucet is ideal for dispensing different beer styles, wine, soda water and soft drinks.

• With a spacious 170 L interior, the kegerator can accommodate up to 4 Cornelius kegs or a standard KEG up to 50 L. The digital temperature controller makes it suitable not only for cooling and dispensing beverages but also for beer fermentation and maturation.
  
• The temperature can be easily adjusted using the external digital control panel without opening the door. The stainless steel flow control faucets allow you to adjust the beverage flow rate and help reduce excessive foaming.
  
• The kegerator comes with beverage and gas tubing and the necessary fittings for easy installation. 

Package Contents

• KEGBOX.4 kegerator
  
• SLIM beer tower with 1 stainless steel Intertap flow control faucets(US type)
  
• Plastic drip tray with cut-out
  
• 4 heavy-duty castor wheels (2 lockable) with mounting screws
  
• CO₂ cylinder holder (for cylinders up to 2.6 kg)
  
• Chrome guard rail
  
• Wire shelf
  
• MK4 CO₂ regulator with G3/4" thread and 8 mm push-in fitting
  
• Gas tubing: 2 m, 8 mm OD
  
• Beverage tubing:  EVABarrier 4 × 8 mm
  
• Necessary connecting fittings

Main Features

• 1 stainless steel Intertap flow control faucet
  
• SLIM stainless steel beer tower
  
• Digital temperature controller with LCD display
  
• 170 L interior capacity
  
• Rear-mounted condenser for efficient cooling and improved performance in warm environments
  
• No side clearance required for ventilation
  
• Internal fan activated by the compressor
  
• Two sealed rear openings for gas tubing
  
• External CO₂ cylinder holder
  
• Stainless steel door
  
• Automatic interior lighting
  
• Stainless steel floor plate for increased durability
  
• Reversible door opening
  
• Adjustable wire shelf with 4 height positions
  
• Adjustable feet for uneven surfaces
  
• 4 heavy-duty castor wheels for easy movement
  
• Compatible with Cornelius kegs, PolyKegs and standard KEG barrels

Technical Specifications

• Capacity: 170 L
  
• Voltage: 220–240 V
  
• Power consumption: 85 W
  
• Rated current: 0.8 A
  
• Refrigerant: R600a (40 g)
  
• Insulation: Cyclopentane
  
• Climate class: T (Tropical)
  
• Temperature controller setting range: -5 to 28 °C
  
• Cooling only – no heating element
  
• EU power plug

Dimensions

• Width: 60 cm
  
• Depth: 66 cm (78 cm including CO₂ cylinder holder)
  
• Height with adjustable feet: 85 cm (117 cm including beer tower, excluding faucets and handles)
  
• Height with castor wheels: 89 cm (122 cm including beer tower, excluding faucets and handles)

Keg Capacity

• 4 × Cornelius kegs (Ø 21.5 cm)
  
• 3 × Slim KEGs (Ø 23.2 cm)
  
• 1 × 15 L, 30 L or 50 L KEG (Ø 37 cm)
  
• 2 × 15 L KEGs stacked vertically (only the upper keg can be tapped)
  
• 2 × PolyKegs (Ø 24 cm) + 1 × Cornelius keg (Ø 21.5 cm)
  
• A low-profile elbow fitting is required when using a 50 L KEG.

Advantages over Standard Refrigerators

• The top panel is pre-drilled for easy beer tower installation.
  
• Two sealed rear openings allow convenient routing of CO₂ or nitrogen tubing.
  
• An external CO₂ cylinder holder saves valuable space inside the refrigerator.
  
• The optimized interior provides maximum space for kegs without the raised compressor compartment commonly found in standard refrigerators.
  
• An integrated fan directs cold air into the beer tower to help maintain the beverage temperature.
  
• The digital temperature controller allows adjustments without opening the refrigerator door.
  
• Installation and Ventilation
  
• Thanks to the rear-mounted condenser, no ventilation clearance is required on the sides of the kegerator. However, a minimum clearance of 5–10 cm must be maintained
• behind the unit to ensure proper airflow.
  
• The kegerator is intended for indoor use only and is not suitable for fully enclosed built-in installation. Avoid exposure to direct sunlight.
  
• CO₂ Cylinder Connection
  
• The included MK4 CO₂ regulator features a G3/4" thread, commonly used on CO₂ cylinders in the Czech Republic. Unlike regulators with W21.8 threads, it can be connected directly to compatible G3/4" cylinders without an additional adapter. If you require a regulator with a W21.8 thread, we can offer the MK5 CO₂ regulator with W21.8 connection. Please specify this in the order notes.
  

Important Information About Beverage Tubing

• The beer tower is supplied with pre-installed EVABarrier beverage tubing with an inner diameter of 4 mm and an outer diameter of 8 mm. This tubing size is commonly used in dispensing systems with US-type faucets. The smaller inner diameter provides increased flow restriction, helping to reduce excessive foaming when the dispensing system is correctly balanced.
  
• Please note that 9.5 mm (3/8") OD beverage tubing is also commonly used in the Czech Republic. To connect the supplied tubing to your keg couplers, make sure to use suitable beverage push-in fittings for 8 mm OD tubing.

Additional Accessories Required

• The CO₂ cylinder and keg couplers are not included and must be purchased separately. Select the appropriate keg couplers or Ball Lock disconnects depending on the type of kegs you intend to use.
  
• A low-profile elbow fitting is required when dispensing from a 50 L KEG.
  
• The CO₂ cylinder can be shipped together with the kegerator on a pallet.