A-Type Filling Coupler

Code: B23836
Not rated Rating details
€107,92 €89,19 excl. VAT Measure price:
In stock (10 pcs)
Delivery to:
24.11.2026

A-Type Keg Filling Kit with Keg Coupler and 0–10 Bar Pressure Gauge is a practical solution for filling beer into commercial kegs fitted with A-type valves.

Detailed information

Product detailed description

A-Type Keg Filling Kit with Keg Coupler and 0–10 Bar Pressure Gauge is a practical solution for filling beer into commercial kegs fitted with A-type valves. The kit allows counter-pressure filling, helping to minimize foaming, CO₂ loss and unwanted oxygen exposure. It is suitable for homebrewers and smaller breweries.

The filling system is based on a stainless steel A-type keg coupler, equipped with ball valves, a pressure gauge, connecting adapters and DMfit push-fit fittings. The assembly allows the operator to control beer flow, monitor pressure inside the keg and gradually release gas during filling. The push-fit connectors provide convenient tubing connections.

Main advantages:

  • Easy filling of commercial kegs with A-type valves.
  • Counter-pressure filling helps reduce foaming and CO₂ loss.
  • 0–10 bar pressure gauge for monitoring keg pressure.
  • Ball valves for controlling beer and gas flow.
  • Controlled pressure release during the filling process.
  • DMfit push-fit connectors for easy tubing connections.
  • Suitable for homebrewing and small-scale brewery operations.

How does it work?

The filling system operates on the counter-pressure principle. Beer flows into a pre-pressurized keg, displacing CO₂, which is gradually released through a control valve. By maintaining a small pressure difference between the source vessel and the receiving keg, beer can be transferred smoothly with reduced foaming.

Basic filling procedure:

  • 1. Assemble the filling kit and make sure all three valves are closed. Connect the beer supply line to valve No. 1 and the CO₂ supply line to valve No. 2.
  • 2. Attach the coupler to a clean and sanitized keg fitted with an A-type valve.
  • 3. Before filling, it is recommended to purge the receiving keg with CO₂ to minimize oxygen exposure.
  • 4. Open valve No. 2 and pressurize the keg to the same pressure as the source vessel. Monitor the pressure gauge, then close valve No. 2.
  • 5. Open valve No. 1 to allow beer to enter the keg.
  • 6. Slowly open valve No. 3 to gradually release CO₂ from the keg. This creates a small pressure difference, allowing smooth filling with minimal foaming.
  • 7. Monitor the pressure gauge during filling and adjust the gas release as necessary. If foam begins to escape, close the beer inlet and the pressure release valve.
  • 8. Once filling is complete, safely disconnect the filling assembly from the keg and then disconnect the tubing.

Specifications:

  • Keg coupler type: A-type (flat fitting)
  • Keg coupler material: stainless steel
  • Pressure gauge range: 0–10 bar
  • Filling method: counter-pressure filling
  • Application: filling beer into commercial kegs
  • Tubing connections: DMfit push-fit fittings
  • Supplied unassembled

Package contents:

  • 1× Stainless steel A-type keg coupler KL
  • 1× Stainless steel ball valve, 5/8" F/M
  • 1× DMfit push-fit connector, F5/8 × 9.5 mm
  • 1× Adapter F5/8 × M1/4
  • 1× Cross connector (+), F1/4
  • 1× PTFE thread sealing tape, 19 mm × 15 m × 0.2 mm
  • 1× DMfit push-fit connector, M1/4 × 8 mm (5/16"), with O-ring
  • 1× Pressure gauge with 8 mm stem, 0–10 bar
  • 2× Brass reducing ball valves, 1/4 × 5/8 M/M
  • 2× DMfit push-fit connectors, F5/8 × 8 mm

Important: This filling kit is not intended for intensive industrial use. Recommended capacity is approximately 100–150 kegs of 50 liters per week at most. The kit is supplied unassembled and requires assembly before use. Always observe the safe working pressure limits of the kegs and all connected equipment. The 0–10 bar pressure gauge range does not indicate the maximum permitted operating pressure of the assembly.

Additional parameters

Category: Keg and Bottle Fillers
Weight: 1.49 kg

Plnička Keg sudu

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Vložením hodnocení souhlasíte s podmínkami ochrany osobních údajů

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů

×

Splátková kalkulačka ESSOX