Beer Line Cleaner Beercleaner 02 Active 1kg

Product detailed description

Acidic sanitizing solution. Highly effective, meeting the highest standards for cleanliness in beer and other beverage lines used in the food industry. Dissolves beer stone and effectively limits its formation. The sanitizing liquid is odorless with a strong disinfectant effect. It is not chlorine-based but relies on active oxygen. Suitable for sanitizing beverage lines for beer, wine, and non-alcoholic beverages.

• Contains: potassium peroxydisulfate, orthophosphoric acid.
• We recommend a 2% (5%) solution depending on the degree of contamination and method of application.

Safety Instructions

• The product is corrosive and acidic – it can cause severe skin burns and eye damage.
• Always wear protective gloves, goggles, and protective clothing when handling.
• Avoid contact with skin and eyes; do not inhale vapors.
• In case of eye contact, rinse immediately with plenty of water for several minutes. Remove contact lenses if present and continue rinsing.
• If swallowed, do not induce vomiting, rinse mouth and seek medical attention immediately.
• If inhaled, move the affected person to fresh air and keep them at rest.

Dilution and Dosage

• Recommended dilution: 2 % to 5 % solution, depending on the degree of contamination and cleaning method.
• For routine maintenance, use a 2 % solution; for heavy deposits, use a 5 % solution or extend the contact time.
• It is recommended to alternate with an alkaline cleaner (e.g. Beer Cleaner blue type) – for example, use the acidic cleaner every third sanitization.

Instructions for Use

• Drain any remaining beer from the system and taps.
• Open all taps to allow the cleaning solution to circulate through the entire system.
• Prepare the Beer Cleaner O2 Active solution according to the recommended dilution (2–5 %).
• Fill the solution into a cleaning vessel or connect it to the dispensing system.
• Allow the solution to circulate through the system and act for several minutes (depending on contamination).
• After cleaning, thoroughly rinse the entire system with warm water until all chemical residues are removed.
• Before reconnecting the keg, make sure the system is completely clean and free of chemical odor.